D14 Interactive Info; Figure 4-10 Interactive Info Led Display - Motorola DCT6400 Series Installation Manual

4-22 Diagnostics
Field Description
Max Temp For an internal hard drive only, its maximum temperature in degrees F.
Over Temp
Yes — The internal drive temperature exceeds 60º C. The LED Over-Temp Indicator
is on and remains lit until the next over-temp sample is taken (at least once an hour).
No — There is no over temp problem.
Count The cumulative number of times that the hard drive temperature exceeds 60º C, with the
temperature checked at least once an hour.

d14 Interactive Info

This diagnostic describes the interactive information that is displayed only when Thin Client
platform is running. The information on the OSD and LED is updated at least once every 5
seconds while the diagnostic is displayed. This is an example of a code module display with
status descriptions:
IP ADDRESS:
UPM:
UPSTREAM ID:
DOWNSTREAM ID:
STATE:
MAC ABORT CNTR:
SOCKET PORT STATE:
0
1
2
3
4
Figure 4-10
Interactive Info LED display
The Interactive Info fields are:
Field Description
IP Address The IP address in dotted-decimal format xxx.xxx.xxx.xxx assigned by the NC 1500 to the
set-top. 0.0.0.0 is displayed if the IP address is not configured or unknown.
UPM The upstream modem address value is the same as the terminal ID assigned by the
DAC 6000. It is a unique, system-generated, eight-digit integer between 1 and 16777215.
00000000 is displayed when the UPM is not configured or unknown.
Upstream ID A four-digit decimal value from 0000 to 9999 assigned by the DAC 6000 to the set-top.
0000 is displayed if the Upstream ID is not configured or unknown.
DCT6400 Series Installation Manual
INTERACTIVE INFO
0.0.0.0
00000021
0000
0000
UNCONFIG
0000
UNUSED
UNUSED
UNUSED
UNUSED
UNUSED
P P
MUTE MUTE