Motorola DCT6400 Series Installation Manual page 52

Field Description
Drive Indicates the drive type — IDE (internal), 1394, USB (external), or NOT AVAILABLE
(neither enabled nor configured).
Record Capacity Indicates the remaining recording capacity, in bytes.
Remaining
Hard Drive Status Page:
Number of Installed Drives: 1
Drive: 1
Model Number:
Device ID:
Type:
Total Size:
System
GPFS
PVR Content
PVR Index
State
Temp (F)
Over Temp
The Hard Drive Status page fields are:
Field Description
Number of The number of internal and external hard drives, up to a maximum of 9
Installed Drives
Drive The identification number sequentially assigned to each installed drive and whether the
drive is INTERNAL or EXTERNAL
Model Number The model number for the drive assigned at the factory
Device ID A text string of up to 20 characters that identifies the disk drive. "N/A" is displayed if the
value is invalid or cannot be retrieved.
Type Indicates the drive type — IDE, 1394, USB, or Unkn(own)
Total Size Displays the drive size in GB.
System, GPFS, Displays the space used and allocated for each of the internal hard drive's 4 partitions —
PVR Content, System, GPFS, PVR Content, and PVR Index — in MB for each partition. "N/A" displays if
and PVR Index the value is invalid or cannot be retrieved.
State Can be:
Standby — The hard drive is working normally, but is at rest (the State returns to
Active any time disc access is necessary).
Active — The hard drive is accessing data.
Failed — The hard drive hardware has failed.
Temp (F) For an internal hard drive only, its temperature in degrees F.
Hard Drive Status
INTERNAL
ST3120025ACE
N/A
IDE
120 GB
Active
118
No
Diagnostics
Used Allocated
1 238 MB
2 2861 MB
10864 109944 MB
35 1431 MB
Max Temp: 122
Count: 0
DCT6400 Series Installation Manual
4-21