3.8.3
Alarm In Event Action (Notify) Setup Screen
3.8.4
Motion Detector Event Action (Record) Setup Screen
Siemens Building Technologies
Fire & Security Products
The DVR can be set to contact a computer running RAS (Remote Administration
System) or send an e-mail (LAN connections) when certain events occur. See the
Figure 61 – Callback Center (LAN) Setup screen or Figure 62 – Callback Center
(Modem) Setup screen.
Fig. 50
Alarm In Event Action (Notify) setup screen.
Highlight the Sched box and press the
Set the schedule as described earlier.
Highlight the Notify box and press the
Off. When it is On, the DVR notifies the remote site when certain alarm inputs
are activated based on a defined schedule.
The DVR can be set to react to motion detector differently. Each camera can be
assigned a schedule, associated camera, recording speed, video quality and dwell
time.
Fig. 51
Motion Detector Event Action (Record) setup screen.
button. A schedule screen appears.
button. This toggles between On and
SISTORE AX9 AX16_EN.doc
Configuration
49
09.2004