Lost Connection To Host; Mounting The Cradle - Motorola LI4278 Product Reference Manual

1 - 10 LI4278 Product Reference Guide

Lost Connection to Host

If scanned data does not transmit to the cradle's host, ensure that all cables are firmly inserted and the power
supply is connected to an appropriate AC outlet. If scanned data still does not transmit to the host, reestablish
a connection with the host:
Disconnect the power supply from the cradle.
1.
Disconnect the host interface cable from the cradle.
2.
Wait three seconds.
3.
Reconnect the host interface cable to the cradle.
4.
Reconnect the power supply to the cradle, if required.
5.
Reestablish pairing with the cradle by scanning the pairing bar code.
6.
NOTE The CR0078-S does not always require a power supply whereas the CR0078-P always requires a power
supply.

Mounting the Cradle

For information on mounting the CR0078-S cradle, refer to the documentation included with the cradle.