Chapter Descriptions; Aim Code Identifiers - Motorola LI4278 Product Reference Manual

Chapter Descriptions

Topics covered in this guide are as follows:
•
Chapter 1, GETTING STARTED
connection information.
•
Chapter 2, SCANNING
how to use the linear imager scanner.
•
Chapter 3, MAINTENANCE, TROUBLESHOOTING & TECHNICAL SPECIFICATIONS
information on how to care for the linear imager scanner and cradle, troubleshooting, and technical
specifications.
•
Chapter 4, RADIO COMMUNICATIONS
available for wireless communication. This chapter also includes programming bar codes to configure
the linear imager scanner.
•
Chapter 5, USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS
bar codes for selecting user preference features for the linear imager scanner and commonly used bar
codes to customize how the data is transmitted to the host device.
•
Chapter 6, KEYBOARD WEDGE INTERFACE
scanner and cradle for Keyboard Wedge operation.
•
Chapter 7, RS-232 INTERFACE
for RS-232 operation.
•
Chapter 8, USB INTERFACE
USB operation.
•
Chapter 9, IBM INTERFACE
with IBM 468X/469X POS systems.
•
Chapter 10, 123SCAN2
of scanners.
•
Chapter 11, SYMBOLOGIES
necessary for selecting these features for the linear imager scanner.
•
Chapter 12, ADVANCED DATA FORMATTING
transmitting to the host. This chapter also contains the bar codes for advanced data formatting.
•
Appendix A, STANDARD DEFAULT PARAMETERS
miscellaneous linear imager scanner defaults.
•
Appendix B, PROGRAMMING REFERENCE
conversions, and keyboard maps.
•
Appendix C, SAMPLE BAR CODES
•
Appendix D, NUMERIC BAR CODES
specific numeric values.
•
Appendix E, ALPHANUMERIC BAR CODES
keyboard, used when setting ADF rules.
•
Appendix F, ASCII CHARACTER SETS
provides a product overview, unpacking instructions, and cable
describes parts of the linear imager scanner, beeper and LED definitions, and
provides information about the modes of operation and features
provides information for setting up the linear imager
provides information for setting up the linear imager scanner and cradle
provides information for setting up the linear imager scanner and cradle for
provides all information for setting up the linear imager scanner and cradle
(PC based scanner configuration tool) enables rapid and easy customized setup
describes all symbology features and provides the programming bar codes
(ADF) describes how to customize scanned data before
provides a table of AIM code identifiers, ASCII character
includes sample bar codes.
includes the numeric bar codes to scan for parameters requiring
includes the bar codes representing the alphanumeric
provides ASCII character value tables.
About This Guide
provides a table of all host devices and
xxi
provides
provides programming