Table of Contents
Advertisement
Ethernet Connection
Connect the Ethernet cable to the local network or to the Internet.
Power Supply
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding
power port of the network encoder.
J
Be careful not to reverse the polarity when you connect the power cable.
You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.
If PoE and DC 12V are both applied, this camera will get supplied with power from PoE.
If you connect the machine to external device, please make sure that the product's power
connected with encoder is turned off.
Power
Ethernet
English _17
Advertisement
Table of Contents
