Table of Contents
Advertisement
setup screen
SD record
You can set the record conditions or the use of recording for the SD memory, check the
size of stored data, or format the SD memory itself.
1.
From the Setup menu, select the
<Event (
2.
Click <SD record>.
To make recording on the SD memory
1.
Check the <Total size> and the <Free size>.
2.
If the SD memory has a suffi cient free space, set <Record> to <On>.
Otherwise, check the stored data and if you fi nd them not important, then click
<Format> to format the SD memory.
If your SD memory card writes slowly, only one frame per second will be stored.
For a SD memory card with a large capacity, the formatting will be slowed down accordingly.
If the size of data grows with time, only 1 fps can be stored even if you set the record quality to Full
Frame.
3.
Specify the record conditions.
Record 1 fps forcibly : Only one frame per second will be recorded regardless of
the existing record profi le.
Overwrite : If the SD memory is full, this will delete old data and store new data in
replacement.
Pre-alarm duration : Specify the time point before the occurrence of the alarm;
starting from the time point, the images will be transferred. You can specify up to
5 seconds before the occurrence of the alarm.
Post-alarm duration : Specify the time point after the occurrence of the alarm; to
the specifi ed time point, the images will be transferred. You can specify up to 120
seconds after the occurrence of the alarm.
4.
When done, click [Apply (
54_ setup screen
)> tab.
)].
Advertisement
Table of Contents
