Table of Contents
Advertisement
194
Chapter 17—Remote Control
• If no check boxes are selected:...........Pro Tools timecode format is set to "Min-
C
SELECT ASSIGN
This parameter indicates the current parameter, which can be adjusted via the parame-
ter controls on the page. For example, Pan, PanR, SndA, SndB, SndC, SndD, or SndE
(see page 196).
D
P.WHEEL MODE
This parameter indicates the function currently assigned to the Parameter wheel (see
page 197).
E
INSERT ASSIGN/EDIT section
This section enables you to insert plug-ins into Pro Tools channels and adjust plug-in
settings. Use the left and right [
displayed in this section.
• ASSIGN ......................... Turn on this button to insert plug-ins into Pro Tools channels.
• COMPARE.................... You can compare your edits with the original settings by turn-
• BYPASS ......................... Turning on this button bypasses the plug-ins (see page 204).
• INSERT/PARAM.......... Switching this button to INSERT enables you to assign plug-ins
• Information box.......... This box displays plug-in parameter names, values, alarm mes-
• Rotary controls 1–4..... These controls enable you to select plug-ins or adjust the
01V96 Version 2—Owner's Manual
utes:Seconds" or "Samples."
]/[
] Tab Scroll buttons to change the parameters
(If you are using the TDM system, you can also assign outboard
effects processors.)
ing on this button. This button works in unison with the Com-
pare button in the Pro Tools Inserts and Sends windows.
using four rotary controls on the page. Switching this button to
PARAM enables you to adjust the plug-in parameters using the
four rotary controls (see page 203).
sages from Pro Tools, etc.
selected plug-in parameters.
Advertisement
Table of Contents
