Brother HL-4140CN Service Manual page 379

<Details>
Item
USBNo. When the OS of the computer is
Windows Vista
to obtain the serial No. of a USB
device depending on the computer
and USB device. To avoid this
problem, the return value of the
serial No. is switched to "0."
PS.DitherType This function is to switch the dither
pattern when printed letters and/or
slanted lines are not smooth, and
thin lines are rough or uneven.
DP.ImpGray This function is to switch ON/OFF of
the print control for the gray color
when other colors are slightly
blended in the gray color or the gray
color is uneven upon printing.
Regi Freq This function is to switch the
threshold value which is used as the
timing to execute Auto Registration.
The threshold value can be
switched in three phases between
High, Mid, and Low.
DX.XAdjust This function is to adjust the left-end
print start position on the second
side in the left and right direction if it
is displaced in duplex printing.
The adjustable range is -100 to 750
(unit: 300 dpi) (The minus direction
means the left direction.)
DpSlp.StrDt This function is to switch whether or
not to permit the printer to go into
Deep Sleep when StoreData
(Secure) exists in the main body.
Special Printing Dots appeared when hagaki printing
is performed can be alleviated by
changing the transfer current
setting.
(Only for Japanese hagaki printing)
Description
®
, it might not be able
5-66
Setting
USBNo. =ON
Returns the serial No. of the
device.
USBNo. =OFF
Returns "0."
PS.DitherType=0
Improves roughness of letters
and slanted lines.
PS.DitherType=1
Alleviates banding.
DP.ImpGray=ON
Improves the symptom that other
colors are slightly blended in the
gray color.
DP.ImpGray=OFF
Improves the unevenness of the
gray color.
Regi Freq=Mid
The frequency to execute Auto
Registration is middle.
Regi Freq=High
The frequency to execute Auto
Registration is high.
Regi Freq=Low
The frequency to execute Auto
Registration is low.
DX.Xadjust=**
To move the print start position to
the left, press the button and
decrease the value. To move the
print start position to the right,
press the button and increase
the value.
DpSlp.StrDt =ON
Even when StoreData(Secure)
exists, the Deep Sleep function
operates.
DpSlp.StrDt =OFF
When StoreData(Secure) exists,
the Deep Sleep function does not
operate.
Default
HAGAKI1
HAGAKI2
HAGAKI3
Confidential