9.5
Fuser Unit
(1) Remove the Taptite bind S M3x8 screw from the Fuser cover R.
(2) Release the Hook to remove the Fuser cover R from the Main body.
Main body
(3) Disconnect the two Connectors (CN1, CN2) from the Paper eject sensor PCB ASSY.
Connector
Paper eject sensor PCB ASSY
Fuser cover R
Fig. 3-13
CN2
Fig. 3-14
3-30
Hook
Taptite bind S
M3x8
<Back side>
Connector
CN1
Confidential