Initialization Of Eeprom Of Main Pcb Assy (Maintenance Mode: Code 01); Setting By Country (Maintenance Mode: Code 74); Setting The Serial Number - Brother HL-4140CN Service Manual

1.2 Initialization of EEPROM of Main PCB ASSY
(Maintenance Mode: Code 01)
Initialize the EEPROM in accordance with
1.3

Setting by Country (Maintenance Mode: Code 74)

Make appropriate settings by country in accordance with
Chapter 5.
1.4

Setting the Serial Number

<Procedures>
(1) Connect the PC and printer with the USB cable.
(2) Double-click the brusbsn.exe file which has been copied in the "hl4000" folder to start.
(3) Click the C-Laser 10Model.
(4) In Port on the brusbsn screen, select the port number assigned to the Brother
Maintenance USB Printer. If the port number is unknown, follow steps below.
1) Click Start | Settings | Printers.
"1.4.1 EEPROM Parameter Initialization" in Chapter
"1.4.19 Setting by country" in
4-4
5.
Confidential