4
en | Planning
1
Planning
CAUTION!
CLASS 1 LED PRODUCT
IEC60825-1 Ed. 1.2 (2001)
WARNING!
IMPORTANT MOUNTING INSTRUCTIONS
This apparatus must be securely attached to the wall in accordance with these installation
instructions. Failure to follow installation instructions may result in injury or death.
CAUTION!
Ensure that the selected location is protected from falling objects, accidental contact with
moving objects, and unintentional interference from personnel. Follow all applicable building
codes.
Select a suitable location that protects the camera from accidental damage, tampering and
environmental conditions exceeding the specifications of the camera.
Follow these mounting guidelines:
1.
2.
1.1
Hardware Requirements
Tools Required
–
–
–
–
Hardware Requirements
–
–
–
–
F.01U.166.250 | 1.0 | 2011.04
Locate the camera such that it cannot be easily interfered with, either intentionally or
accidentally.
Select a smooth, flat mounting surface to ensure proper sealing. The surface must also
support the combined weight of the camera and mounting hardware under all expected
conditions of vibration and temperature. Recommended mounting height is at least 4 m
(13 ft); however, optimal conditions will vary with the specific installation environment.
1x 5 mm (3/16) hex key; 1x 4 mm (5/32) hex key (supplied)
Small, straight-blade screwdriver - 2.5 mm (0.1 in.)
Socket wrench and 9/16 in. (14 mm) socket
Drill and 7/32 in. (5.5mm) drill bit
VEI-30 or NEI-30 junction box
Four (4) lag bolts, 1/4-9 x 2 (M7-0.35 x 50) with 1/2 in. head (not supplied)
Four (4) 1/2 in. (12 mm) washers (not supplied)
Two (2) 3/4 in. (20 mm) NPS watertight pipe fittings OR 1/2 in. (15 mm) NPS watertight
pipe fittings (not supplied)
Quick Install Guide
NEI-30 | VEI-30 Dinion Infrared Imager
Bosch Security Systems, Inc.