Port_Command_Disabled (Id: 00200214); Illegal_Command (Id: 00200215) - D-Link NetDefend DFL-210 Log Reference Manual

2.1.76. port_command_disabled (ID:
00200214)
Explanation
Gateway Action
Recommended Action
Revision
Parameters
Context Parameters

2.1.76. port_command_disabled (ID: 00200214)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
Context Parameters

2.1.77. illegal_command (ID: 00200215)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
An invalid command was received on the control channel. This is
allowed, but the command will be rejected as it is not understood.
rejecting_command
If unknown commands should not be allowed, modify the FTPALG
configuration.
1
peer
string
ALG Module Name
ALG Session ID
Connection
WARNING
FTPALG: PORT command not allowed from <peer>. Rejecting
command
The client tried to issue a "PORT" command, which is not valid since
the client is not allowed to do active FTP. The command will be
rejected.
rejecting_command
If the client should be allowed to do active FTP, modify the FTPALG
configuration.
1
peer
ALG Module Name
ALG Session ID
Connection
WARNING
FTPALG: Failed to parse PORT parameters from <peer>.
String=<string>. Closing connection
Invalid parameters to the "PORT" command were received. The
connection will be closed.
close
None.
1
peer
string
66
Chapter 2. Log Message Reference