Voltage_Normal (Id: 04000022); Fanrpm_Alarm (Id: 04000031) - D-Link NetDefend DFL-210 Log Reference Manual

2.16.4. voltage_normal (ID: 04000022)

Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
2.16.4. voltage_normal (ID: 04000022)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.16.5. fanrpm_alarm (ID: 04000031)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
Voltage monitor <index> (<name>) is outside the specified limit.
Current value is <current_voltage> <unit>, lower limit is <min_limit>,
upper limit is <max_limit>
The powersupply of this unit may be failing.
none
Change powersupply unit.
1
index
name
unit
current_voltage
min_limit
max_limit
WARNING
Voltage monitor <index> (<name>) is outside the specified limit.
Current value is <current_voltage> <unit>, lower limit is <min_limit>,
upper limit is <max_limit>
The sensor reports that the voltage value is back in the normal range.
None
None.
1
index
name
unit
current_voltage
min_limit
max_limit
WARNING
Fan RPM monitor <index> (<name>) is outside the specified limit.
Current value is <current_fanrpm> <unit>, value is <current_fanrpm>
<unit>, lower limit is <min_limit>, upper limit is <max_limit>
The fan is behaving strange, this may because it is failing or blocked.
none
Unblock or change the corresponding fan.
1
index
221
Chapter 2. Log Message Reference