05-4055A01, Rev. E
•
Remote Serial Gateway
to the Remote transceiver serial ports.
Gateway Configuration (IP-to-Remote Serial)" on Page
•
Security Configuration
security services.
Page
64.
•
Wireless Network
and manage Remote radios.
MENU" on Page
•
Statistics/Event Log
network performance.
on Page
77.
•
Device Information
parameters, such as the date, time, console baud rate, and device
name information.
Page
84.
•
Maintenance/Tools
images and configuration files, and applying Authorization
Keys to change radio capabilities.
TOOLS" on Page
•
—Places the radio in a "1+1"
Redundancy
redundancy-compatible mode. This mode is specifically for use
with GE MDS P22 packaged model chassis. Check with your
GE MDS sales representative for available configurations.
See "REDUNDANCY MENU" on Page
•
—This selection provides access to a submenu
DNP3 Routing
where you can manage DNP3 routing attributes.
ROUTING MENU" on Page
3.4 CONFIGURING NETWORK
PARAMETERS
3.4.1 Network Configuration Menu
The Network Configuration Menu
and Ethernet-level parameters.
MDS entraNET Technical Manual
—Tools to configure the data connections
—Tools to configure the transceiver
See "SECURITY CONFIGURATION" on
—Tools to manage Remote and AP databases,
See "WIRELESS NETWORK
69.
—Tools to measure the radio and data layer
See "STATISTICS AND EVENT LOG"
—Top-level customer-specific and definable
See "DEVICE INFORMATION MENU" on
—Tools for upgrading and selecting firmware
See "MAINTENANCE AND
85.
97.
(Figure
3-13) is the home of all IP-
See "Remote Serial
62.
93.
See "DNP3
45