Tabletop Setup And Evaluation - GE MDS entraNET 900 Technical Manual

05-4055A01, Rev. E
2
TABLETOP SETUP AND
EVALUATION
2 Chapter Counter Reset Paragraph
2.1 INTRODUCTION
2.2 CONNECTOR OVERVIEW
2.3 TEST SETUP
STEP 1-CONNECT THE ANTENNA PORTS ................................19
STEP 2-MEASURE AND CONNECT DC POWER........................19
STEP 3-CONFIGURE THE AP ......................................................22
Log-in and Configuration ..................................................................22
Set Key AP Parameters....................................................................23
STEP 4-CONFIGURE THE REMOTE RADIO ...............................24
Log-in and Configuration ..................................................................24
Set or Verify Network Address..........................................................25
STEP 5-CONNECT TERMINAL EQUIPMENT ..............................26
Ethernet Device Connection to Remote ...........................................26
Serial Device Connection to Remote................................................26
STEP 6-CHECK FOR NORMAL OPERATION ..............................26
2.3.1 Verify Connectivity (PING command) ..........................................27
Serial Connections ...........................................................................27
MDS entraNET Technical Manual
17
17
18
15