View Point Status; Table 4: Point Status Messages; View Pt Status - Bosch D1255RB User Manual

11.2.6 VIEW POINT STATUS ?

Description
Use this function to identify the number or location of each
point in an area, and to show the current condition of any
point you select. This function is useful as an aid in servicing
the system.
Using the View Point Status Function
1. Press the [ESC] key to enter the menu. Press [NEXT]
until you reach the VIEW PT STATUS ? prompt.
2. Press [ENT]. The display shows AREA X ##
(where X = the area number and ## = the number of
points to view).
3. Press [ENT]. The display shows PT ## XXXXX (where
XXXXX = the type of point).
4. Press [ENT] again to see the current condition of the
point. The display shows one of the point status
messages. Refer to Table 4.
Bosch Security Systems, Inc. | 8/06 | F01U011793B
Fire System | User's Guide | 11.0

Table 4: Point Status Messages

Message Status
PT###_SHORT_HW
A hard-wire (HW) point is shorted.
PT###_OPEN_HW
A hard-wire (HW) point is open.
PT###_NORML_HW
A hard-wire (HW) point is normal.
PT###_MISNG_HW
A hard-wire (HW) point is missing.
5. Continue pressing [ENT] to see the type and condition of
each point in the area.
6. Press [ESC] to return to idle text.
System Functions
33