Display Rev - Bosch D1255RB User Manual

The central station might direct you to press
[NEXT]. When you press [NEXT], ANSWER NOW
appears. If you press [ENT], the system behaves
as described in Steps 5 through 8, starting on
page 30.
6. If you want your system to call the RPS, press [ENT]
when the display shows CALL RPS ?. The display
shows CALLING RPS briefly when the control panel
dials the RPS phone number in its memory. The display
changes to SYSTEM PROGRAM when the system connects
to RPS.
7. At the conclusion of the programming session your
system sends a report to the security company and then
returns your telephone to normal service and your
display to idle text.
Bosch Security Systems, Inc. | 8/06 | F01U011793B
Fire System | User's Guide | 11.0

11.2.5 DISPLAY REV?

Description
This function displays the revision of firmware currently
installed in the control panel.
Using the Display Revision Function
1. Press the [ESC] key to enter the menu.
2. Press [NEXT] until you reach the DISPLAY REV ?
prompt. The display shows 9412GV2 V
or 7412GV2 V # # - # # for five seconds, then
returns to idle text.
System Functions
# # - # #
32