Surround Play Using The Listen Mode; Checking The Current Input Signal - Kenwood KRF-V6400D Instruction Manual

Surround play using the listen
mode
Select the listen mode according to the source being played back.
LISTEN MODE
LISTEN MODE
Preparations
• Turn the components to be used ON.
• Complete <Speaker setup>.
• Select the source you wish to play back with
surround sound.
• Select the input mode •.
(When the input mode is set to "AUTO" (i.e. when
the "AUTO DETECT" indicator is lit), the listen
mode matching the input signal type and speaker
setup are selected automatically. Noise may be
produced when a DTS source is played by selecting
the analog input.)
1
Start playing the selected source.
2
Use [LISTEN MODE] to select the listen mode.
Each press switches the listen mode.
32
KRF-V6400D/KRF-V5450D
Checking the current input
signal
The type and number of channels of the audio signal input can
be checked.
DISPLAY
1
Press [DISPLAY].
The type of listen mode and its number of input channels
are displayed for a few seconds.
Example: Display with DTS 5.1-channel input
• After displaying the type of listen mode and its number of
input channels, the display will switch back to the input
source name.
• This function is not available when in Tuner source.