Table of Contents
Advertisement
Chapter 5
Console Management
Login in the Console Interface
To configure the system via console mode, connect a serial cable to a COM port on a
PC or notebook computer and to RJ-45 type serial (console) port of the Managed
Switch. The console port of the Managed Switch is DCE already, so that you can
connect the console port directly through PC without the need of Null Modem.
To get more information about how to connect to the console interface of GE-DS-
242-PoE with HyperTerminal please refer to the GE-DS-242-PoE Installation Sheet.
Once the terminal has connected to the device, power on the GE-DS-242-PoE, the
terminal will display that it is running testing procedures.
Then, the following message asks the login password. The factory default password
as following and the login screen in Figure 5-1 appears.
Username: admin
Password: admin
GE-DS-242-PoE Managed Ethernet Switch User Manual
121
Advertisement
Table of Contents
