MENU-DRIVEN CONSOLE MANAGEMENT
The switch provides a menu-driven console interface for configuration purposes.
The switch can be configured either locally through its RS-232 port or remotely via
a Telnet session.
This section describes how to configure the switch using its menu-driven console.
Logging On To The Switch
At the screen prompt:
Login Name
Enter the console interface factory default console name admin.
Password
Enter the factory default password (ethernav, press <Enter> directly).
Or enter a user-defined password if you followed the instructions later and
changed the factory default password.
Factory Default Password: ethernav, press <Enter> directly.
NOTE: Only one console and three Telnet users can log on to the switch
concurrently. However, it is not recommended that multiple users modify
the configuration at the same time.
User's Manual
Switch Console Login:
Password:
Manageable 8/9-Port Switch
23