GE -DS-242-POE User Manual page 128

Chapter 5: Console Management
IP: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 5-3: Set IP address screen
2. Repeat Step 1 to check if the IP address is changed.
If the IP is successfully configured, the Managed Switch will apply the new IP address
setting immediately. You can access the Web interface of Managed Switch through
the new IP address.
NOTE: If you are not familiar with console command or the related parameter, enter
"help" anytime in console to get the help description.
You can change these settings, if desired, after you log on. This management method
is often preferred because you can remain connected and monitor the system during
system reboots. Also, certain error messages are sent to the serial port, regardless of
the interface through which the associated action was initiated. A Macintosh or PC
attachment can use any terminal-emulation program for connecting to the terminal
serial port. A workstation attachment under UNIX can use an emulator such as TIP.
124 GE-DS-242-PoE Managed Ethernet Switch User Manual