Table of Contents
Advertisement
lowest maximum dynamic range of the three preset
settings.
•
Custom WDR: Use the options of this setting to adjust the
limits of the dynamic range.
To select a lighting environment setting:
•
At the Main Menu, use the up and down buttons to move
to the LOCATIONS option, use the right and left buttons
to move to and between the options (GENERAL,
OUTSIDE, OFFICE, and CUSTOM_WDR), then press
the bottom selection button to select the option showing.
Figure 16. Locations Menu
To adjust the bias and limit of the custom WDR setting (if
selected):
•
With CUSTOM_WDR still highlighted, press the bottom
selection button. At the WDR menu, use the up and down
buttons to move between the bias and limit scales and use
the right and left buttons to adjust the markers on the
scales.
25
Advertisement
Table of Contents
