GE SymVeo SV-XP1 User Manual page 14

8 SymVeo IP Camera
User Manual
Figure 4. Camera connections
Coaxial cable with BNCs between VIDEO OUT and local monitor
Cat 5 ethernet cable between ETHERNET connector and the
network connection
1. Connect a coaxial cable terminated with BNC connectors
between the VIDEO.OUT connector of the camera and
the video in connector on a test or local monitor.
2. Connect a Cat 5 ethernet cable between the ETHERNET
connector of the camera and a router, multiplexer, or any
other network device.
3. Connect a 12 VDC 1 Amp power supply as show above
to the terminal block. As an option, connect a coaxial
cable with BNCs between VIDEO OUT and a local
monitor.
4. As an option, connect a microphone and pre-amp with an
audio RCA plug into the AUDIO socket. The audio line
is line-level and requires amplification.