GE SymVeo SV-XP1 User Manual page 18

12 SymVeo IP Camera
User Manual
2. Refer to Figure 8 on page 15 of this document. Press the
up button for around three seconds on the back of the
camera, bringing up the Network Settings Menu.
3. Configure the IP address, Network Mask and Gateway by
using the enter menu button to move in and out of each
setting, the right and left buttons to move the cursor back
and forth within each setting, and the up and down
buttons to change the number in each space. The up,
down, left, and right buttons take continuous effect in
this menu.
4. Once you have properly configured the IP address on the
On Screen Display, move the cursor to the Save function
and click on the enter menu button on the back of the
camera.
5. The camera will reboot with the new IP settings, and you
should be able to access the camera via Internet Explorer
or equivalent web browser.
Figure 6. The IP address menu