To avoid damaging the telescopic
runners, make sure that they are
pushed back into the appliance.
The dividing panel in the MasterFresh
drawer can be removed for cleaning.
^ Take the MasterFresh drawer out of
the appliance completely.
^ Pull the dividing panel in the
MasterFresh drawer up and out to
remove it.
^ After cleaning, slide the dividing
panel back into the drawer.
Please note: The MasterFresh zone
does not work as efficiently without
the dividing panel in place.
To replace the drawer
^ Pull the telescopic runners out as far
as they will go.
^ Place the MasterFresh drawer on the
runners so that it engages at the
back and front.
^ Turn the slot on the pin to its vertical
position.
^ Push the MasterFresh drawer all the
way back into the appliance.
Arranging the interior fittings
Adjusting the door
shelves/bottle shelf
The door shelves can be moved when
loading or unloading and for cleaning
or they can be removed completely.
^ Hold the door shelf by its frame with
both hands, raise it a little and then
tip it forwards slightly.
^ Slide the shelf in this angled position
up or down in the side runners as
required, and then lower it into its
new position.
^ Make sure that the shelf is straight.
To remove the door shelf altogether,
^ Slide it up the side runners to the
very top, then lift it out.
To replace the door shelf
^ Engage it in the runners at the top,
and lower to the position required.
33