Switching Off - Miele KF 1801 Vi Operating And Installation Manual

The sensor for switching the ice cube
maker on and off will appear on the
right in the control panel (only visible if
the freezer zone has been selected).
This sensor will be highlighted in yellow
when the ice cube maker is in
operation.
To select settings for your appliance
(e.g. to set the temperature, etc),
^ touch the sensor for the particular
zone of the appliance where you
would like to select the settings.
The applicable sensor will then be
highlighted in yellow, and depending
on the zone, further settings which may
be selected will now appear in the
display.
Depending on which zone you have
selected, you can
– adjust the temperature, or
– select Super cool and Super freeze
– adjust the humidity levels for the
MasterFresh zone
– switch on the ice cube maker.
Please refer to the relevant section for
more information.
Switching on and off
To deselect a zone
^ touch the sensor of the selected zone
again so that it is highlighted in white,
or select a different sensor.
To finish selecting settings,
^ touch the access sensor so that it is
highlighted in white.
Your last selected settings will now be
saved to memory.
If you do not touch the access sensor,
the electronics for accessing the
settings will switch off after a period.

Switching off

^ Press the rocker switch on the
right-hand side underneath the
control panel.
The cooling system and the lighting are
now switched off.
15