Yamaha WR450F(W) Owner's Service Manual page 672

2
3
REAR SHOCK ABSORBER
2. Install:
NOTE:
• Apply the molybdenum disulfide grease on
• Install the dust seals with their lips facing out-
3. Install:
1
4. Install:
M
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
5. Install:
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
6. Install:
7. Tighten:
5 - 67
• Bush 1
• Collar 2
• Dust seal 3
the bearing and dust seal lips.
ward.
• Rear shock absorber
• Bolt (rear shock absorber-frame) 1
• Washer 2
• Nut (rear shock absorber-frame) 3
56 Nm (5.6 m · kg, 40 ft · lb)
• Bolt (rear shock absorber-relay arm) 1
• Nut (rear shock absorber-relay arm) 2
53 Nm (5.3 m · kg, 38 ft · lb)
• Rear frame 1
• Bolt [rear frame (upper)] 2
38 Nm (3.8 m · kg, 27 ft · lb)
• Bolt [rear frame (lower)] 3
32 Nm (3.2 m · kg, 23 ft · lb)
• Screw (air filter joint) 1
3 Nm (0.3 m · kg, 2.2 ft · lb)
CHAS