Notification By Pager - GE 4 Series User Manual

Note
Disarming the system turns
off the Energy Saver.
Notification by
Pager
18
Temperature settings can range from 45° to 90° Fahrenheit.
To set the Energy Saver temperature range from a touchpad:
1. Enter the programming menus by pressing
070
2. Press .
3. Enter the lowest temperature (45–89°F) you'll allow before the furnace turns on, and press
B
4. Press . Enter the highest temperature (46–90°F) you'll allow before the air conditioner turns
#
on, then press .
* 00 #
5. Press + + to exit the programming menus.
To override your normal heating or air conditioning settings, turn the Energy Saver feature on.
When you are ready to return to your normal temperature control settings, turn Energy Saver off.
To turn Energy Saver on/off from any touchpad:
7 2
1. Press + . Alphanumeric touchpads display, "ENERGY SAVER IS ON," for example.
Your system can notify up to five different pager phone numbers to report system events. The
installer can program any numeric pager to receive pages for one or more of the following
groups.
High Level Reports
Sensor Alarms Freeze Alarms
Tamper Freeze Troubles
Restorals No Activity Alarm Supervisory
Phone Tests Fire Panic
Receiver Failure Police Panic
Receiver Jam Auxiliary Panic
Touchpad Tamper
Bus Failures
• Opening and Closing Reports
• Latchkey Reports
• Notify by Exception Reports
Figure 5.Energy Saver Setpoints
9
+ System or Partition Master
Low Level Reports
Bypass Sensors AC Power Failure
Low Battery CPU Low Battery
Auto Phone Test
Trouble CPU Back in Service
Phone Test Phone Failure
Event Buffer Full Touchpad Low Battery
Concord 4 Series Security Systems
CODE
.
#
.