HP 34401A User Manual page 31

Chapter 2 Front-Panel Menu Operation
A Front-Panel Menu Tutorial
MESSAGES DISPLAYED DURING MENU USE
TOP OF MENU
You pressed
menu and you cannot go any higher.
To turn off the menu, press
on a level, press or
<
>
MENUS
You are on the "menus" level. Press
COMMANDS
You are on the "commands" level. Press
command choices within the selected menu group.
PARAMETER
You are on the "parameter" level. Press
the parameter for the selected command.
MENU BOTTOM You pressed
level of the menu and you cannot go any lower.
To turn off the menu, press
press .
CHANGE SAVED The change made on the "parameter" level is saved. This is
displayed after you press
Auto/Man
MIN VALUE The value you specified on the "parameter" level is too small for the
selected command. The minimum value allowed is displayed for you to edit.
MAX VALUE
The value you specified on the "parameter" level is too large for the
selected command. The maximum value allowed is displayed for you to edit.
EXITING MENU You will see this message if you turn off the menu by pressing
< (Menu On/Off) or a front-panel function/math key. You did not edit any values
Shift
on the "parameter" level and changes were NOT saved.
NOT ENTERED
You will see this message if you turn off the menu by pressing
Shift < (Menu On/Off) or a front-panel function/math key. You did some editing of
parameters but the changes were NOT saved. Press
to save changes made on the "parameter" level.
NOT RELEVANT The selected math operation is NOT valid for the function in use.
30
while on the "menus" level; this is the top level of the
Shift <
(Menu On/Off). To move across the choices
. To move down a level, press
< >
or
<
<
while on the "parameter" level; this is the bottom
Shift <
(Menu On/Off). To move up a level,
(Menu Enter) to execute the command.
Auto/Man
.
to view the choices.
>
or to view the
>
or to view and edit
(Menu Enter)