Identification Of Controls; Front Panel - Toshiba HD-S25 Owner's Manual

IDENTIFICATION OF CONTROLS

FRONT PANEL

n
Red LED indicator
ON: Receiver in power-on mode; OFF: Receiver in standby mode
o
Four-digit LED display
- Shows "----" in standby mode
- Shows " " when time information is not available
- Shows " " when the receiver is switching from standby to power-on mode
- Shows the local time, channel number or "
- Momentarily shows the new video format when changing the video format setting
- Momentarily shows "
p
Green LED indicator
ON: Signal captured; OFF: No signal or receiver in standby mode
q
Orange LED indicator
ON: Receiver in AUX mode; OFF: Receiver in non-AUX mode
Note: The orange LED is on whenever the receiver is in AUX mode, regardless the receiver is on or
in standby mode. Please refer to AUX on page 43 for details.
r
MENU button
Activate the On Screen Menu
s
EXIT button
Exits from the Main Menu or returns to the Main Menu from submenu
t
ENTER button
Select the highlighted menu or submenu item
u
Directional buttons
- Move the selection focus on the screen
- Left and right buttons for increasing and decreasing audio volume
- Up and down buttons for channel up and down functions
v
V.FORMAT button
Toggles among "PAL" (for MODE-Switch being set to YP
"576p" video output formats.
w
STANDBY/ON button
Toggles the receiver between power-on and standby modes
n o p
" in power-on mode
" or " " when switching the MODE in the rear panel
q r s t u v w
P only), "AUTO", "1080i", "720p", and
B R
7