Table of Contents
Advertisement
PASSWORD
x
Highlight "PASSWORD" and press the
"ENTER" button. When prompted, enter your
current password by pressing the numeric
buttons on the remote control.
x
You will then be prompted to enter the New
Password.
x
Enter the new password again to reconfirm.
Notes:
1.
The default password is 0000.
2. If you forget your password, please refer to
"S/W UPDATE" to "update" the software and
reset the password to default.
TIME ZONE
x
Highlight "TIME ZONE" and press the
"ENTER" button.
For Australia:
Use the " " and " " buttons to select the local
time zone you are located in.
For other region:
Use the " " and " " buttons to select the time
zone you are located in.
EXT CONTROL
For details of controlling the HD-S25 receiver by an external device connected via the RS-232 serial port,
please consult your local dealer.
33
Advertisement
Table of Contents
