Toshiba HD-S25 Owner's Manual page 13

connector, use a Mini D-Sub 15-pin cable (not supplied) to connect the receiver to your TV. Set
the MODE-Switch (refer to page 8) to RGB, and then connect the RGB connector on the rear
of the receiver to the corresponding socket on the TV.
Do not connect any PC monitor to the receiver via Mini D-Sub 15-pin cable.
Some HD-ready TV may not display some specific video format via Mini D-Sub 15-pin video
connection. In this case, please press V.FORMAT button to change to an appropriate fixed
format. (For more details, please refer to Appendix 2 System Setup Table in page 50).
SERIAL PORT
RGB
Mini D-Sub 15-pin video cable
Note: This diagram illustrates video connections only. Please refer to Page 15 for Audio connection.
(b) RGBHV (RCA) connection: If your TV has RGBHV video inputs, use a RGBHV video cable
(not supplied) to connect the receiver to your TV. Set the MODE-Switch (refer to page 8) to
RGB, and then connect the Y/G, P
the rear of the receiver to the corresponding jacks on the TV.
HD-S25
HD OUTPUT
Y /G
P /B
B
RGB
MODE
P /R
R
YP P
RGB
B R
Note: This diagram illustrates video connections only. Please refer to Page 15 for Audio connection.
HD-S25
DIGITAL
HD OUTPUT
AUDIO
Y /G
(COAXIAL)
P /B
HD
B
MODE
P /R VD
R
(OPTICAL)
YP P
RGB
B R
(not supplied)
/B, P
B R
Match the
G
colors when
B
connecting
R
HD
HD
VD
VD
RGBHV video cable
(not supplied)
SD OUTPUT
VIDEO
L L
R R
S-VIDEO
To TV Mini D-Sub 15-pin
video input
/R, HD and VD connectors from "HD OUTPUT" on
To TV RGBHV
video inputs
G
B
R
HD
VD
13