Table of Contents
Advertisement
72
en | Concepts
5.
6.
Auto pop-up alarms
Alarms can be configured to automatically display (pop up) in the Alarm Image window, based
on the alarm priority. Each user group's live and playback displays are also assigned priorities.
When alarms are received with priority higher than that of the user's display, the alarm
automatically displays its alarm row in the Alarm Image window. If the Alarm Image window is
not currently displayed, it automatically replaces the Live or Playback Image window on the
alarm-enabled monitor.
Although auto pop-up alarms are displayed in the Alarm Image window, they are not
automatically accepted. They can be displayed on multiple users' displays simultaneously.
When a user accepts an auto pop-up alarm, it is removed from all other users Alarm Lists and
alarm displays.
13.2
Enterprise System
The target of a Bosch VMS Enterprise System is to enable a user of Operator Client to
simultaneously access multiple Management Server computers.
The Management Server where you configure a list of further Management Server computers is
called Enterprise Management Server. This server can additionally play the role of a normal
Management Server.
13.2.1
Scenarios
The following three scenarios are covered.
–
An Operator Client workstation logs on to an Enterprise Management Server. After successful
logon the user of Operator Client has access to the devices of all configured Management
Server computers.
2012.07 | V1 | Operation Client
The alarm title, time, and date can be optionally be displayed on all analog monitors, or
only the first monitor in the alarm row.
For equal priority alarms, the administrator can configure the order behavior:
–
Last-in-First-out (LIFO) mode: in this configuration, new alarms are inserted above
older alarms of the same priority.
–
First-in-First-out (FIFO) mode; in this configuration, new alarms are inserted below
older alarms of the same priority.
An alarm's Image row can appear in the Alarm Image window in one of two ways:
–
When it is generated (auto pop-up). This occurs when the alarm priority is higher
than display priority.
–
When the alarm is accepted. This occurs when the alarm priority is lower than
display priority.
Scenario 1: A dedicated server plays the role of an Enterprise Management Server. This
server has the only task to manage the simultaneous access of an Operator Client
workstation to multiple Management Server computers.
Operator's Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
