Table of Contents
Advertisement
Bosch Video Management System
To display metadata in a separate window:
1.
2.
5.20
Using the Intercom functionality
Main window >
You can use the Intercom functionality only when Live Mode is active.
Ensure that the microphone is active on your sound card and its volume is not 0. You perform
this task in the Control Panel of your workstation computer. Additionally ensure that in the
recording control of your sound card only the microphone is selected, not the stereo mix. For
Windows 7: Disable all input devices except the one you want to use for Intercom
functionality.
The following screenshot shows an example:
If you change the setting from stereo mix to microphone after the first start of Operator
Client, the setting is overridden after the next start of Operator Client.
We recommend to use a headset instead of a microphone-loudspeaker combination to avoid
acoustic feedback.
The Intercom functionality only works with an encoder that has both audio-in and audio-out.
Ensure that the volume settings for the encoder microphone and loudspeakers are not 0. You
perform this task in Configuration Client.
Bosch Sicherheitssysteme GmbH
Select an Image pane.
In the Camera menu, click Show Metadata....
A window is displayed with the available metadata.
When you close the selected Image pane, the Metadata window is closed too.
Operator's Manual
Displaying camera images | en
2012.07 | V1 | Operation Client
17
Advertisement
Table of Contents
