Table of Contents
Advertisement
40
en | Using a CCTV keyboard
10.3.1
Starting the keyboard
After starting the keyboard you must log on to the Management Server.
Notice!
Only Bosch Video Management System users with number-only user names and number-only
i
passwords can use the analog mode of a CCTV keyboard.
The user must have access rights for the decoder connected to the CCTV keyboard.
To start the keyboard:
4
4
After successful logon, the Terminal and Keyboard Control softkeys are displayed in the
softkey display.
10.3.2
Displaying cameras
1.
2.
10.3.3
Using the joystick
The joystick allows you to use the following features:
–
–
–
2012.07 | V1 | Operation Client
Press the Terminal softkey.
The following logon display is shown:
User #
_ _ _
BOSCH VMS
Enter the user name.
Password
_ _ _ _ _ _
BOSCH VMS
Press Mon, press the number of the desired monitor, and press ENTER.
Monitor numbers are configured in the Configuration Client.
Press the desired number of the camera and press ENTER.
The desired camera is displayed.
Example: Press Mon, 3, and ENTER. Then press 4 and ENTER. Camera 4 is displayed in
the 3rd analog monitor.
When the selected monitor displays a PTZ camera, the keyboard switches to PTZ mode
automatically.
Twist the joystick to zoom in and out.
Tilt the joystick to pan and tilt a PTZ camera.
Use Focus and Iris buttons for a PTZ camera.
Operator's Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
