Table of Contents
Advertisement
MIC412TI and MIC412TF Camera | Installation and Operation Manual
Safety Precautions
The following symbols are used throughout this manual please pay careful
attention to their meaning.
The lightning flash with an arrowhead symbol within a triangle
is intended to alert the user to the presence of non-insulated
"dangerous voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of electric shock
to persons.
The exclamation point within a triangle is intended to alert the
user to the presence of important safety, operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
Important Safety Instructions
CAUTION
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DISCONNECT POWER SUPPLY BEFORE OPENING THE
POWER SUPPLY UNIT.
POWER DISCONNECT: POWER SUPPLY UNITS HAVE
POWER SUPPLIED WHENEVER THE POWER CORD IS
INSERTED INTO THE POWER SOURCE.
WARNING
INSTALLATION SHOULD BE CARRIED OUT BY QUALIFIED
PERSONNEL IN ACCORDANCE WITH THE NATIONAL
ELECTRIC CODE, ANSI/NFPA, CANADIAN ELECTRICAL
CODE, AND ALL LOCAL COUNTRY CODES.
BOSCH SECURITY SYSTEMS ACCEPTS NO LIABILITY
FOR ANY DAMAGES OR LOSSES CAUSED DUE TO
INCORRECT OR IMPROPER INSTALLATION.
Bosch Security Systems
WARNING
INSTALL EXTERNAL INTERCONNECTING CABLES IN
ACCORDANCE TO NEC, ANSI/NFPA70 (FOR US
APPLICATION) AND CANADIAN ELECTRICAL CODE,
PART I, CSA C22.1 (FOR CAN APPLICATION) AND IN
ACCORDANCE TO LOCAL COUNTRY CODES FOR ALL
OTHER COUNTRIES.
BRANCH CIRCUIT PROTECTION INCORPORATING A
20 A, 2-POLE LISTED CIRCUIT BREAKER OR BRANCH
RATED FUSES ARE REQUIRED AS PART OF THE
BUILDING INSTALLATION.
A READILY ACCESSIBLE 2-POLE DISCONNECT DEVICE
WITH A CONTACT SEPARATION OF AT LEAST 3 mm
MUST BE INCORPORATED.
ROUTING OF EXTERNAL WIRING MUST BE DONE
THROUGH A PERMANENTLY EARTHED METAL CONDUIT.
WARNING
THE CAMERA MUST BE MOUNTED DIRECTLY AND
PERMANENTLY TO A NON-COMBUSTIBLE SURFACE.
Issue 8
AAA
EN | 4
Advertisement
Table of Contents
