NEC Express5800/320Fd-LR User Manual page 93

– When there are multiple logical drives, select a partition that you would like to
install the OS after the next message appears.
The following list shows the existing partitions and unpartitioned space on
this computer.
Use the UP and DOWN ARROW keys to select an item in the list.
– You cannot change drive letters for the system volume or the boot volume after
completing the setup. Make sure the drive letter is allocated to proper drive on
this screen, and then proceed the setup.
After completing the setup, the drive letters may not be the same as before the
setup. If you would like to change the drive letters, follow the procedure [How to
change drive letters] described later.
TIPS:
After copying the files, the system automatically reboots. You do not
have to eject the floppy disk and the CD-ROM. When you do not eject
the floppy disk, do not eject the CD-ROM either.
Follow the instructions on the screen to continue the setup. Refer to
[Fist Step Guide] for details.
After installing Windows Server 2003 x64 Editions, the system automatically reboots.
10.
After logging on the system, [Windows Setup] screen appears.
11.
IMPORTANT:
– [Windows Setup] screen may not appear; however, make sure to install
Microsoft Windows Server 2003 R2 x64 Editions DISK 2.
– After applying [Update the system], you can install Microsoft Windows Server
2003 x64 Edition DISK 2. Make sure to install Microsoft Windows Server 2003
R2 x64 Edition. [Windows Setup] screen does not appear this time.
Load the Microsoft Windows Server 2003 R2 x64 Edition DISK 2 into the Optical disk drive.
12.
Check the setting, then click [OK].
After the installation, eject the Microsoft Windows Server 2003 R2 x64 Edition DISK 2 from
13.
the Optical disk drive, then reboot the system.
14. Follow the steps below to update the system.
Do not input or output data during the update process.
a) After logging on to the system as a user with the Administrative account, insert NEC
EXPRESSBUILDER DVD into the drive of the server.
b) When the "Autorun Munu" screen appears, click [Setup Windows] and click [Update the
sysmte] on the menu.
Windows Setup 4-29