Table of Contents
Advertisement
MC55 AT Command Set
12.19 AT^SMGL
12.19
AT^SMGL List SMS messages from preferred store without set-
ting status to REC READ
Syntax
Test Command
AT^SMGL=?
Response(s)
same as
AT+CMGL
Exec Command
AT^SMGL
Response(s)
^SMGL: (For default values of
OK
Write Command
AT^SMGL=<stat>
Response(s)
same as
AT+CMGL
PIN
ASC0
ASC1
MUX1
%
%
%
Reference(s)
SIEMENS
Command Description
The execute command is the same as the write command, but uses the given default of
The write command allows to select a status type and lists, from the message storage
that currently have the specified
status of the listed messages remains u n c h a n g e d (unread remains unread).
Notes
•
The selected
<mem1>
TUS-REPORTs and SMS-COMMANDs), the response may be a mix of the responses of different SM types.
TE application can recognize the response format by examining the third response parameter.
•
This command can be used only after the SMS data from the SIM have been read successfully for the first
time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds
depending on the SIM used. While the read process is in progress, an attempt to use any of the sms read
commands will result in ''+CME Error: 14'' (SIM busy)
MC55_ATC_V01.05
Confidential / Released
, see Chapter "
<stat>
MUX2
MUX3
%
%
%
. The major difference over the standard command
<stat>
can contain different types of SMs (e.g. SMS-DELIVERs, SMS-SUBMITs, SMS-STA-
Page 347 of 469
.)
SMS parameters
s
m
obile
.
<stat>
, all messages
<mem1>
is that the
AT+CMGL
2/10/04
Advertisement
Table of Contents
