Usb Board - Toshiba Qosmio X500 Maintenance Manual

Replacement Procedures

4.16 USB Board

The following describes for removing the USB board (See Figure 4-16-1).
Removing the USB Board
1. Pull out the USB cable, Audio cable, from USB board connector.
2. Loose the below screws and then incline pull out USB board.

M2.5x6.5
Installing the USB Board
The following describes the procedure for installing the USB board.
1. Insert the USB board into base case and connect USB board cable, Modem cable
2. Fix the below screws
M2.5x6.5
NOTE: Be careful not to catch the cables between top cover assembly and base
assembly.
Qosmio X500 Maintenance Manual (960-Q08)
FLAT BIND screw
Figure 4-16-1 Remove the USB board
FLAT BIND screw
x2
x2
4-48