Toshiba Qosmio X500 Maintenance Manual page 176

Replacement Procedures
Installing an optical disk drive
The following describes the procedure for installing an optical disk drive.
1. Attach the ODD bracket to an optical disk drive and secure it with the following
screws.
 M2.03.0 Flat BIND screw
2. Insert an optical disk drive assembly into the slot and connect it to the connector
CN26 on the system board.
3. Secure the ODD drive with the following screw.
 M2.5X5.0 Flat BIND screw
Qosmio X500 Maintenance Manual (960-Q08)
Figure 4-5-2 Disassemble the side bracket
x2
x1
4-17