Aligning The Appliance - Miele F 1811 Vi Operating And Installation Manual

Installation

Aligning the appliance

^ Align the appliance with
neighbouring furniture fronts.
The installation aids e on the
appliance door are suitable for the
following thicknesses of furniture door
front:
– 19 mm
– 38 mm
The adjustable feet at the front and
back of the appliance can all be
adjusted from the front.
– Front feet: with spanner SW 13.
The front feet can be adjusted either
from the top or from underneath f.
– Back feet: with a socket wrench with
hexagonal bit (8 mm) g.
^ Place a spirit level on the installation
aids e on the appliance door to
check the appliance's alignment.
64
^ A mark is located on the appliance
plinth. When adjusting the height, this
mark needs to be aligned at 32 mm
from the floor. Unscrew the feet until
the mark has reached 32 mm.
It is very important to comply with
this dimension for the subsequent
alignment of the furniture door front.
^ Check the alignment of the appliance
again using the spirit level.
Note:
– To avoid the appliance becoming
wedged inside the niche, proceed
carefully when adjusting the feet,
alternating between the left and right
feet.
– If a wooden beam has been fitted
above the appliance to prevent
tipping, the appliance height needs
to be adjusted to fit snuggly under
the wooden beam.