Miele F 1811 Vi Operating And Installation Manual page 25

The dividing panels can also be
removed for cleaning.
The dividing panel is held in place by
fittings in the freezer basket. To loosen
the fittings,
^ Use a screwdriver or similar to turn
the slots in the pegs to a horizontal
position a.
^ Remove the pegs from the fittings b.
^ Pull the dividing panel upwards to
remove it.
To replace the dividing panel
^ Place the fittings in an upright
position, and locate the dividing
panel in the fittings so that you hear it
click into place.
^ Replace the pegs in the fittings, and
use a screwdriver or similar to turn
the slots in the pegs into a vertical
position.
Arranging the interior fittings
To replace the freezer basket
^ Pull the telescopic rails out as far as
they will go.
^ Place the freezer basket on the rails
so that it engages at the back and
front.
^ Turn the slot on the (child safety) pin
to its vertical position.
^ Push the freezer basket back in.
25