Miele @home XKM 2000 KM Installation Instructions Manual page 15

Installation instructions and conditions required
– A communication module must be fitted to each communication enabled
appliance.
– The appliance must be fitted with a communication module.
– Appliances only need to be signed on to the Miele|home system once.
– Appliances can be signed on during the First installation of the Miele|home
system.
– Appliances can be signed on at a later date to the master appliance, e.g.
SuperVision appliance or InfoControl unit of an existing Miele|home system.
– The appliances remain signed on even if they are switched off.
– The SuperVision appliance must be fitted with Communication module XKM
2000 SV.
– The First installation of the Miele|home system only needs to be carried out
once.
– The appliances remain signed on even if the SuperVision appliance is
switched off.
– The First installation of the Miele|home system only needs to be carried out
once.
– The appliances remain signed on even if the InfoControl unit is switched off.
– Information on a communication enabled hob can only be displayed on the
InfoControl XIC 2100.
Miele|home
15