Miele hdsn-30 CS 7641 FL Installation Manual

Installation
Safety instructions for installation

Damage risk from incorrect installation.
Incorrect installation can cause damage to the SmartLine element.
The SmartLine element must only be installed by a qualified person.

Risk of electric shock!
Incorrect connection to the mains supply may result in an electric shock.
The SmartLine element must be connected to the electrical supply by a
qualified person only.

Damage from falling objects.
Take care not to damage the SmartLine element when fitting wall units or a
cooker hood above it.
Fit the wall units and the cooker hood before the SmartLine element.

The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any backmoulds must be of heat-resistant
material.

The SmartLine element must not be installed over a fridge, fridge-
freezer, freezer, dishwasher, washing machine, washer-dryer or
tumble dryer.

This SmartLine element must not be installed above ovens or
cookers unless these have a built-in cooling down fan.

After installation, the mains connection cable of the SmartLine
element must not come into contact with any moving kitchen
component (e.g. a drawer) or be subject to mechanical loads which
could damage it.

Observe carefully the safety clearances listed on the following
pages.
11782200-00