Setting The Industrial Ethernet Station Addresses - Siemens SIMATIC NET Manual

16 Configuration Console Tool
16.3.3

Setting the Industrial Ethernet Station Addresses

Note
The modules for SOFTNET Industrial Ethernet are managed by the Windows
operating system. This means that the station addresses of these modules must
be set with the standard mechanisms of Windows.
If you want to set the Industrial Ethernet station addresses of the CP 1613.....
1 Open the "Modules" folder in the navigation area.
Select a module of the type "CP1613".
Click on the "Address" property.
228
Activity
Commissioning PC Stations - Manual and Quick Start
Release 5/2005
C79000-G8976-C156-07