Displaying The Industrial Ethernet Network Parameters For A Cp 1613 - Siemens SIMATIC NET Manual

16.4.2 Displaying the Industrial Ethernet Network Parameters for a CP
1613
For the Industrial Ethernet module CP 1613, the following current settings are
displayed
S duplex mode (half duplex, full duplex, automatic)
S medium type (AUI, TP, automatic)
S transmission rate (10 Mbps, 100 Mbps, automatic)
As long as no valid connection to the module is detected, the output fields display
the entry "unknown".
Follow the steps outlined below...
1 Open the "Modules" folder in the navigation area.
Select the module you want to check.
Click on the "Network parameters" property object.
1
2
Commissioning PC Stations - Manual and Quick Start
Release 5/2005
C79000-G8976-C156-07
16 Configuration Console Tool
Activity
235