Table of Contents
Advertisement
Chapter 3 Initial Setup
3.2 Initial Setup 2
6-2
6-3
6-4
6-5
6-6
7
7-1
The [Set SNMP Agent User] function must be set when using
SNMPv3 in SNMP communication between the SNMP Agent and
SNMP Agent Manager.
Click the [Skip] button to proceed to the next screen without
setting.
Specify the following items, and click the [OK] button.
-
User Name
-
MIB View Setting
-
Authentication
-
Authentication Method
-
Authentication Password
-
Retype Authentication Password
-
Encryption
-
Encryption Password
-
Retype Encryption Password
→ Return to the original screen.
Repeat
Step 6-1
and
Step 6-2
When the setting of the user information is complete, click the [Next] button.
→ A confirmation screen appears.
Click the [OK] button.
→ Setting of the SNMP Agent User starts.
Click the [Done] button.
Proceed to [Set SNMP Agent Community].
Click the [Add] button.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
to configure information for multiple users.
48
P2X0-1090-02ENZ0
Advertisement
Table of Contents
