Chapter 7
This chapter describes Thin Provisioning Pool management.
7.1
Thin Provisioning Pool Status
Thin Provisioning Pool status displays the following status information:
• Thin Provisioning Pool (Basic Information)
• Thin Provisioning Pool (Threshold)
• Thin Provisioning Pool (ECO Mode Schedule)
• Thin Provisioning Pool (License)
Detailed information of the Thin Provisioning Pools can be displayed from the following screen:
• Thin Provisioning Pool Detail (Basic)
7.1.1
Thin Provisioning Pool (Basic Information)
This function shows the list of TPPs.
Thin Provisioning Pool Management
•
Registering the license for the Thin Provisioning feature is required to
use the Thin Provisioning function. To check the registration status of
the license, refer to
•
When "
the TPP list, the TPP used capacity exceeds the threshold. Add drives
immediately to expand the TPP capacity.
•
This function shows the TPP basic information, a list of the RAID groups
that configure the TPP, a list of the TPVs that are registered in the TPP,
and TPP diagnosis information.
•
To check the threshold for monitoring the used capacity of a TPP, refer
to
"7.1.2 Thin Provisioning Pool (Threshold)" (page
•
To check the ECO mode settings of a TPP, refer to
Provisioning Pool (ECO Mode Schedule)" (page
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
"7.1.4 Thin Provisioning Pool (License)" (page
Attention" or "
Warning" is displayed in "Used Status" in
135
141).
137).
"7.1.3 Thin
139).
P2X0-1090-02ENZ0