Maintenance Setup; Event Notification By E-Mail Setup - Fujitsu Eternus DX60 User Manual

Chapter 4 Setup
>

4.4 Maintenance Setup

4.4 Maintenance Setup
If required, set maintenance to be performed easily after starting an operation.
Refer
4.4.1

Event Notification by E-mail Setup

If an error occurs in the ETERNUS DX60/DX80, the event (error information, etc.) is reported to
a specified address.
The procedure to set the E-mail notification is as follows:
Procedure
1
2
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
This section explains the procedure for the setup using GUI. For setting-
related details, refer to the "ETERNUS DX60/DX80 Web GUI User Guide".
For the setup using the CLI commands, refer to "ETERNUS DX60/DX80
Command Line Interface (CLI) User's Guide".
"ETERNUS DX60/DX80 Web GUI User Guide"
"ETERNUS DX60/DX80 Command Line Interface (CLI) User's Guide"
Start GUI.
Click [Setup E-Mail Notification] under the [Network Settings] menu on the
[Global Settings] tab in the GUI screen.
The [Setup E-Mail Notification] screen appears.
145
Copyright 2009 FUJITSU LIMITED